Displaying And Maintaining Connection Limits - HP VSR1000 Security Configuration Manual

Step
1. Enter system view.
2. Enter interface view.
3. Apply a connection limit
policy to an interface.
To apply a connection limit policy globally:
Step
1. Enter system view.
2. Apply a connection limit
policy globally.

Displaying and maintaining connection limits

Execute display commands in any view and reset commands in user view.
Task
Display the connection limit policy
information.
Display the connection limit statistics
globally or on an interface.
Display statistics about IPv6 connections
that match connection limit rules globally
or on an interface.
Clear the connection limit statistics
globally or on an interface.
Command
system-view
interface interface-type
interface-number
connection-limit apply
{ ipv6-policy | policy } policy-id
Command
system-view
connection-limit apply global
{ ipv6-policy | policy } policy-id
Command
display connection-limit { ipv6-policy | policy } { all | policy-id }
display connection-limit statistics { global | interface interface-type
interface-number }
display connection-limit { ipv6-stat-nodes | stat-nodes } { global |
interface interface-type interface-number } [ destination
destination-ip | service-port port-number | source source-ip ] *
[ count ]
reset connection-limit statistics { global | interface interface-type
interface-number }
309
Remarks
N/A
N/A
By default, no connection limit is
applied to an interface.
Only one IPv4 connection limit
policy and one IPv6 connection
limit policy can be applied to an
interface. A new IPv4 or IPv6
connection limit policy overwrites
the old one.
Remarks
N/A
By default, no connection limit is
applied globally.
Only one IPv4 connection limit
policy and one IPv6 connection
limit policy can be applied
globally. A new IPv4 or IPv6
connection limit policy overwrites
the old one.