HP VSR1000 Security Configuration Manual page 277

# Create SSH user client002. Specify the authentication method as publickey for the user. Assign
the public key clientkey to the user.
[Router] ssh user client002 service-type stelnet authentication-type publickey assign
publickey clientkey
# Create a local device management user client002. Specify the service type as ssh for the user.
Assign the user role network-admin to the user.
[Router] local-user client002 class manage
[Router-luser-manage-client002] service-type ssh
[Router-luser-manage-client002] authorization-attribute user-role network-admin
[Router-luser-manage-client002] quit
3. Specify the private key file and establish a connection to the Stelnet server:
a. Launch PuTTY.exe on the Stelnet client to enter the interface shown in
b. In the Host Name (or IP address) field, enter the IP address 192.168.1.40 of the Stelnet server.
Figure 71 Specifying the host name (or IP address)
c. Select Connection > SSH from the navigation tree.
The window shown in
d. Specify the Preferred SSH protocol version as 2.
Figure 72 appears.
267
Figure 71.