HP VSR1000 Security Configuration Manual page 305

# Apply ASPF policy 1 to the inbound direction of interface GigabitEthernet 1/0.
[RouterA-GigabitEthernet1/0] aspf apply policy 1 inbound
[RouterA-GigabitEthernet1/0] quit
Verifying the configuration
# Display ASPF sessions on Router A.
[RouterA] display aspf session ipv4
Initiator:
Source
Destination IP/port: 192.168.1.3/32828
VLAN ID/VLL ID: -/-
Protocol: UDP(17)
Initiator:
Source
Destination IP/port: 192.168.1.2/1719
VLAN ID/VLL ID: -/-
Protocol: UDP(17)
Initiator:
Source
Destination IP/port: 192.168.1.2/20155
VLAN ID/VLL ID: -/-
Protocol: TCP(6)
Initiator:
Source
Destination IP/port: 192.168.1.3/32829
VLAN ID/VLL ID: -/-
Protocol: UDP(17)
Initiator:
Source
Destination IP/port: 192.168.1.2/1720
VLAN ID/VLL ID: -/-
Protocol: TCP(6)
Total sessions found: 5
The output shows that ASPF sessions have been created between Gateway B and Gatekeeper/Gateway
A.
# Verify that only return packets that match the entries can pass through GigabitEthernet 1/0. (Details not
shown.)
IP/port: 1.1.1.111/33184
IP/port: 1.1.1.111/1719
IP/port: 1.1.1.111/3521
IP/port: 1.1.1.111/33185
IP/port: 1.1.1.111/3688
295