Optional Backup Battery Installation - AT&T SB67118 Getting Started

Getting started

Optional backup battery installation

Install four AA batteries (purchased separately) to use some features of
this telephone in the event of a power failure. If power fails with working
batteries installed, all the lines of this phone will work only with the corded
handset. You can answer calls, and dial calls using the dial pad and the
one touch or redial features. No other features will work until AC power is
restored.
Install the telephone base as shown below.
Open the backup
Step 1
battery compartment
cover
Step 2 Place the batteries
in the compartment
following the polarity
label +/- .
NOTES:
1. Use disposable AA alkaline batteries only. Do not use rechargeable batteries.
2. When there is AC power and there is no spare battery or the spare battery is low, the screen
shows LOW BATT.
Step 3
9
Align the cover flat
against the battery
compartment, then
slide it to the left
until it clicks into
place to lock the
cover.