AT&T SB67118 Getting Started page 14

Getting started
Telephone base setup
3. Press or
Press ENTER.
MENU/
4. Press or
L3 or L4, that you want to set as default line for making
outgoing calls.
5. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
Set line mode
For the system to behave properly, it needs to be set for:
a) PBX lines, which are typically business telephone systems that require you
to dial 8 or 9 to get an outside line.
-OR-
b) CO lines, which are standard residential telephone lines. This telephone
comes factory set for PBX lines.
You can set each line, individually to either PBX or CO.
1. When the telephone is idle, press MENU
2. Press or
3. Press or
Press ENTER.
MENU/
4. Press or
5. Press or
PBX or CO.
6. Press or
7. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
NOTE: If the line icon on the base screen display does not reflect the line status, try another
line mode.
to scroll to Line selection.
to scrool to the desired line, Auto, L1, L2,
to scroll to Base setup. Press
to scroll to Set line mode.
to scroll to a desired line, L1, L2, L3 or L4.
to change the highlighted line mode,
to move to another line.
.
/ENTER
ENTER.
MENU/
19
LCD contrast
Key tone
Language
Line selection
>
Line selection
:Auto
Enter=Save
Line selection
:L3
Enter=Save
Call log
Ringer setting
Mailbox setup
Base setup
>
Key tone
Language
Line selection
Set line mode
>
L1 PBX
L2 PBX
L3 PBX
L4 PBX
L1 CO
L2 PBX
L3 CO
L4 PBX