AT&T SB67118 Getting Started page 13

Getting started
Telephone base setup
Key tone
You can turn the Key tone on and off. The telephone base is factory
programmed to beep with each key press. If you turn off the Key tone, there
will be no beeps when keys are pressed.
To turn the key tone on and off:
1. When the telephone is idle, press MENU
2. Press or
3. Press or
4. Press or
5. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
Language
You can change the display language that is used in all menus and screen
displays. Set the display language separately on the telephone base and each
extension separately. This telephone comes factory set for English displays.
To change the display language for the telephone base:
1. When the telephone is idle, press MENU
2. Press or
ENTER.
3. Press or
4. Press or
5. Press ENTER again to save the setting and return
MENU/
to the previous menu. There is a confirmation tone. To
exit without making changes, press EXIT.
Line selection
You can set the specific telephone line for your telephone base to make
outgoing calls. This telephone comes factory set for Auto selectable line,
which chooses the most available line for making a call.
1. When the telephone is idle, press MENU
2. Press or
to scroll to Base setup. Press
to scroll to Key tone. Press
to scroll to On or Off.
to scroll to Base setup. Press
to scroll to Language. Press
to scroll to a language.
to scroll to Base setup. Press
.
/ENTER
ENTER.
MENU/
ENTER.
MENU/
.
/ENTER
MENU/
ENTER.
MENU/
.
/ENTER
ENTER.
MENU/
18
Call log
Ringer setting
Mailbox setup
Base setup
>
LCD contrast
> Key tone
Language
Line selection
Key tone
:Off
Enter=Save
Call log
Ringer setting
Mailbox setup
Base setup
>
LCD contrast
Key tone
Language
>
Line selection
Language
:English
Enter=Save
Call log
Ringer setting
Mailbox setup
Base setup
>