AT&T SB67118 Getting Started page 17

Getting started
Telephone base setup
Hold reminder
You can have silence or to play a beep tone every 30 seconds when there is
a call on hold.
1. When the telephone is idle, press MENU
2. Press or
3. Press or
Press ENTER.
MENU/
4. Press or
5. Press ENTER to save the setting and
MENU/
return to the previous menu. There is a
confirmation tone. To exit without making
changes, press EXIT.
Time adjustment
The answering system displays the day and time of the message while to
playing it. Before using the answering system, set the date and time as
follows. If you subscribe to caller ID service, the day, month and time are set
automatically with each incoming call. The year must be set so that the day
of the week can be calculated from the caller ID information.
Follow the steps below to set the month, day, year and time.
1. When the telephone is idle, press MENU
2. Press or
Press ENTER.
MENU/
3. Press or
Press ENTER.
MENU/
4. Using the dial pad, enter the date. Press
to the item you want to edit, and press the dial pad keys
to enter the correct digit.
5. Press to move to the time editing.
6. Press or
7. Press or
press to enter the correct digit.
-OR-
Press to move back to the date editng.
to scroll to Base setup. Press
to scroll to Hold reminder.
to scroll to On or Off.
to scroll to Base setup.
to scroll to Time adjustment.
to select the AM or PM.
to scroll to the item you want to edit, and
.
/ENTER
MENU/
Flashes
.
/ENTER
or to scroll
21
Line selection
Set line mode
Area codes
ENTER.
Hold reminder
>
Hold reminder
:On
Enter=Save
Set line mode
Area codes
Hold reminder
Time adjustment
>
Date: 12.31. 2006
Time: 12:00
^>=PM Enter=Save
Date: 01.01. 2009
Time: 12:00
^>=PM Enter=Save
Date: 01.01. 2009
Time: 14:30
^>=PM Enter=Save
Wrong
setting
PM
PM
AM