AT&T SB67118 Getting Started page 26

Getting started Getting started
Mailbox setup (for general mailbox) Mailbox setup (for general mailbox)
Press ENTER.
MENU/
4. Press or
Press ENTER to save the setting and return to
5.
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
Notify alert
You can receive notification calls to your cell phone or paging device after
each new phone call message has been recorded to the general mailbox. You
can remotely access the message from a touch-tone telephone (see page
XX for instructions). To receive notification calls, you must save your phone
number on the telephone base, and then set the system to call that number
after it finishes recording a message.
1. When the telephone is idle, press MENU
2. Press or
Press ENTER.
MENU/
3. Press or
Set alert number
1. Press ENTER again to select Alert number. Use
MENU/
the dial pad to enter the number (Up to 33 digits) of the
phone you want to be notified. Press REMOVE to delete
the last digit.
2. Press ENTER to save the setting and return to the
MENU/
previous menu. There is a confirmation tone.
Press EXIT to exit setup without making changes.
Turn alert on or off
1. Press or
Press ENTER.
MENU/
2. Press or
3. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
NOTE: If you turn on Notify alert before you enter the Alert number, "Please set the alert
number" appears on the screen.
to highlight On or Off.
to scroll to Mailbox setup.
to scroll to Notify alert. Press
to scroll to Alert on/off.
to scroll to On or Off.
.
/ENTER
MENU/
30
Call screening
:On
Enter=Save
Call screening
:Off
Enter=Save
Set access code
Call screening
Notify alert
>
Remaining space
ENTER.
Alert number
>
Alert on/off
Alert call #.. #
Enter alert #:
2345678
Enter=Save
Alert number
Alert on/off
>
Alert call #.. #
Alert on/off
:On
Enter=Save