AT&T SB67118 Getting Started page 15

Getting started
Telephone base setup
Area codes
You can program this system to recognize one home area code and up to
four local area codes. This feature makes it easy for you to place a call from
the caller ID log.
If you dial 7 digits to make a local call (no area code required), enter your
area code into the telephone as the home area code. When you receive a
call from within your home area code, the caller ID history only displays the
seven digits of the telephone number, and when you dial from the call log,
only seven digits are dialed.
If you must dial 10 digits (the area code and telephone number) for calls
within your own home area code, enter 000 for the home area code and
enter your area code as a local area code. Then, if you receive a call from
within your area code, the screen displays the 10 digits of the telephone
number, and when you dial from the call log, only ten digits will be dialed.
If you must also dial 10-digit for other nearby area codes, enter those area
codes as local area codes.
1. When the telephone is idle, press MENU
2. Press or
3. Press or
Press ENTER.
MENU/
4. Press or
Press ENTER to edit it.
MENU/
5. Use the dial pad keys to enter a 3-digit area code. Enter
000 for your home area code if you never dial 7-digit
numbers. Press
edit, or press REMOVE to delete digits while entering.
6. Press ENTER to save the setting and return to
MENU/
the previous menu. There is a confirmation tone. To exit
without making changes, press EXIT.
to scroll to Base setup. Press
to scroll to Area codes.
to scroll to Home area or Local area 1-4.
or to scroll to the digit you want to
.
/ENTER
ENTER.
MENU/
20
Call log
Ringer setting
Mailbox setup
Base setup
>
Language
Line selection
Set line mode
Area codes
>
Home area
>
Local area 1
Local area 2
Local area 3
Home area
Enter=Save
Local area 1
001
Enter=Save