Speed Dial Setup - AT&T SB67118 Getting Started

Getting started

Speed dial setup

The telephone base has ten speed dial locations where you can store the
phone numbers you wish to dial using fewer keys than usual. You can store
up to 32 digits in each location.
Enter, edit or delete a speed dial number
1. When the telephone is idle, press MENU
2. Press or
ENTER.
3. Press or
(>Speed dial x, x is the location number), then press
ENTER.
MENU/
4. Use the dial pad to enter or edit the telephone number
up to 32 digits. If you want to delete the entry, erase all
the digits.
• Press or
• Press REMOVE to erase an digit.
• Press and hold REMOVE to erase all the digits at a
time.
5. Press ENTER to save the setting and return to the previous menu.
MENU/
There is a confirmation tone. To exit without making changes, press EXIT.
NOTES:
1. The speed dial feature occupies up to ten of the hundred memory locations in the directory.
For example, if there are only five speed dial entries, then up to 95 entries can be stored in
the directory. If there are already 100 entries in the directory, no new directory and speed dial
entries can be stored in memory until some of the existing ones are deleted.
2. If you press a dial pad key which does not save a number, the screen displays No number.
to scroll to Speed dial setup. Press
to choose the desired speed dial location
to move the cursor to the left or right.
.
/ENTER
MENU/
34
Mailbox setup
Base setup
COVM
Speed dial setup
>
Speed dial 1
>
Speed dial 2
Speed dial 3
Speed dial 4
Enter phone no.:
1234567
Enter=Save
Enter phone no.:
1234567
Enter=Save