Getting started
Battery installation and charging
Battery installation
Install the battery, as shown below.
1.
Plug the battery connector securely into the socket inside the handset
battery compartment. Insert the supplied battery with the label
THIS SIDE UP facing up, as indicated.
2.
Align the cover flat against the battery compartment, then slide it upwards
until it clicks into place.
3.
Charge the handset by placing it face forward in the telephone base or
charger. The CHARGE light is on when charging.
CHARGE light
IMPORTANT INFORMATION:
Use only the supplied rechargeable battery or replacement battery (model BT183342/
BT283342). To order, visit our website at
1 (800) 222-3111
www.telephones.att.com
1 (866) 288-4268
. In Canada, dial
To replace the battery, press the tab
and slide the battery compartment
cover downwards. Lift out the old
battery and disconnect it from the
handset. Follow the instructions to
install and charge the new battery.
6
, or call
.