Stihl MS 200 Service Manual page 116

No. Part Name
23 Service tool AS (set)
- Service tool
24 Assembly tube
25 Stud puller M8
26 Installing tool
27 Installing tool
28 Hook
29 Screwdriver, T 20 x 100
30 Screwdriver, T 27 x 150
31 Screwdriver, Q-SW 8 x 200
32 Torque wrench
33 Torque wrench
34 Screwdriver bit, T 27 x 125
35 Screwdriver bit, T 20 x 125
36 Screwdriver bit, T 27 x 150
Remarks
1) Use for releasing only.
MS 200, MS 200 T
Part No. Application
5910 007 2205 Separating the crankcase halves
5910 890 2205
1117 890 0900 Attaching springs
5910 893 0501 Removing bar mounting studs
1116 893 4800 Refitting rewind spring
0000 890 2201 Installing rope guide bushing
5910 893 8800 Removing pickup body
5910 890 2301 Spline socket screws, installing and
removing (4 mm)
5910 890 2302 Spline socket screws, installing and
removing (5 mm)
5910 890 2420 Nuts on carburetor
5910 890 0302 0.5 to 18 Nm
5910 890 0312 6 to 80 Nm
0812 542 2104 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench (5 mm)
0812 542 2041 Removing and installing spline socket
screws with electric or pneumatic
screwdrivers; tighten down screws with
torque wrench (4 mm)
5910 890 2400 IS-P screws (5 mm)
Rem.
115