Telnet Interface - Comtech EF Data CDM-570A Installation And Operation Manual

D.1.3.4 Telnet Interface
•
Sect. 7.3 Telnet Interface (Chapter 7. ETHERNET-BASED REMOTE PRODUCT
MANAGEMENT)
•
Chapter 8. SERIAL-BASED REMOTE PRODUCT MANAGEMENT
•
Chapter 9. OPTIONAL PACKET PROCESSOR – SERIAL/TELNET CLI
OPERATION
Comtech EF Data provides a Telnet interface for the purpose of equipment monitor and control
(M&C) using either remote control commands and queries or, when equipped with the optional
Packet Processor, the Telnet Command Line Interface (CLI) (Figure D-1).
Figure D-1. CDM-570A/570AL-IP Telnet Interfaces (Serial Remote / CLI)
Optional High Performance Packet Processor
CDM-570L/570AL Satellite Modem with Optional Packet Processor
D–20
Revision 5
MN-CDM570A