H Programming With Windows 95 Hyperterminal - Omron SYSMAC C200H-ASC02 Operation Manual

Overview
Previously, an FIT10 Terminal Pack or N88-DISK-BASIC was required to program the ASCII Unit. Now, how-
ever, it is possible to program using HyperTerminal and other accessories that have been added to the stan-
dard Windows 95 package.
When creating programs using HyperTerminal, the backspace and cursor keys cannot be used in operations
on the terminal screen.
Setup
Connections
Provide a connecting cable for connecting the ASCII Unit to the computer. Connector specifications and the
connection configuration are shown below.
Connector
(a) D-sub 9-pin female Hood:
(b) D-sub 9-pin male
DIP Switch Settings
Set the baud rate for port 1 to 9,600 bps using pins 1 to 3 on the DIP switch on the right side of the back panel
of the ASCII Unit.
Appendix H
Programming with Windows 95
HyperTerminal
XM2S-0913
Connector: XM2D-0901
Hood: XM2S-0911
Connector: XM2A-0901
1 2 3 4
IBM PC/AT or compatible
3 SD
2 RD
7 RTS
8 CTS
6 DSR
4 DTR
5 GND
(a)
5 6 7 8
C200H-ASC02
2 SD
3 RD
4 RTS
5 CTS
7 DSR
8 DTR
9 GND
(b)
151