Back Panel - Omron SYSMAC C200H-ASC02 Operation Manual

Back Panel

1-2 Back Panel
Left-Side DIP Switch Definitions
4
This section explains the operations of the back panel of the ASCII Unit.
There are two 8-pin DIP switches on the Backplane side of the ASCII Unit.
The desired configuration must be set before the ASCII Unit can be plugged
into the Backplane.
Pin 1 is used to select the startup mode of the ASCII Unit. The BASIC pro-
gram can be automatically booted when power is applied or it can be acti-
vated after power is applied by depressing the START/STOP switch.
Pin 2 allows automatic loading of a BASIC program from the EEPROM to the
RAM when power is applied.
Pin 3 and Pin 4 are used to select which of the three BASIC programs will be
used as the boot program.
Pin 5 is not used.
Pins 6, 7, and 8 are used to select the screen size of the display terminal.
The DIP switches are described in more detail in the diagram on the follow-
ing page.
Section 1-2