Omron SYSMAC C200H-ASC02 Operation Manual page 121

Specifications
ON
DTR (output) OFF
ON
RTS (output)
OFF
Data
Device Control Codes
Peripheral Device
Terminal Display At execution
CLOSE
LPRT At execution
CLOSE
COMU At execution
CLOSE
Dimensions
Dimensions with ASCII Unit Mounted on PC
The depth of the ASCII Unit is 100.5 mm as shown in the following figure. However, when the Unit is mounted
on the PC and when a cable is connected to the Unit, the depth may increase up to 200 mm. Consider this
when mounting the ASCII Unit in a control box along with the PC.
114
Data transmission
OPEN INPUT
The transmission buffer (screen) is cleared when code &H0C is output.
The cursor is set to the leftmost position of the screen when code &H0A (LF),
&H0D (CR), &H0B (HOME), or &H0C (CLR) is output.
The cursor is moved on the screen when code &H08 (BS), &H1C (->), or &H1D
(<-) is output.
Codes &H16 (cursor ON) and &H17 (cursor OFF) are ignored and are not output.
Nothing is executed
The cursor is set to the leftmost position when code &H0A, &H0D, &H0B, or
&H0C is output.
If an output line exceeds 80 characters, code &H0A (LF) is automatically
appended to the line data.
If data remains in the transmission buffer, it is output with code &H0A appended
Data is output when characters are sent to the buffer.
If data remains in the transmission buffer, it is output.
Data transmission
Output
Appendix B
For
Port 1
For
Port 2
END CLOSE