Omron SYSMAC C200H-ASC02 Operation Manual page 154

Programming with Windows 95 HyperTerminal
HyperTerminal Startup
• Start up HyperTerminal via Start/Programs/Accessories.
• After starting up HyperTerminal, make the settings shown below.
Location Information
Area code: Enter the area code and select OK.
HyperTerminal
A message prompting you to install a modem will be dis-
played. Select No.
Connection Description
Name: Enter the desired name and select OK.
Connect To
Connect using: Select COM1 and OK.
COM1 Properties
Bits per second: Set to 9,600.
Data bits: Set to 8.
Parity: Set to "None".
Stop bits: Set to 2.
Flow control: Set to "None".
Select OK.
Line Delay
In File/Properties/Settings/ASCII Setup..., set the Line
delay to 300.
Select OK.
• Default settings can be used for all the other settings.
• These settings do not have to be repeated each time you use HyperTerminal. Simply select the icon with the
required name.
• If the modem settings have already been made for the computer you are using, only the settings from Con-
nection Description onwards are required.
Confirming Connection
Key in Ctrl + X at the computer. The following message will be displayed indicating that connection is com-
plete.
C200H-ASC02 (CF-BASIC) V1.6 1994. 12. 28
(C) Copyright OMRON Corporation 1990
READY
Operation
Creating Programs
Programs are created using text editors, such as Notepad, and are saved as text.
Transferring Programs from the Computer
1, 2, 3... 1.
152
Delete the program currently in the ASCII Unit memory using the NEW
command.
2. Transfer the program saved by selecting Send Text File... from the
Transfer menu as shown below.
Appendix H