4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit
Removing the Main Drive Unit
Preparations
1) Removing the Right Cover Unit.
2) Removing the Left Cover Unit.
3) Removing the Controller Cover.
4) Removing the Left Rear Cover.
5) Removing the ADF + Reader Unit.
6) Removing the Upper Cover.
7) Removing the Rear Cover Unit.
Procedure
1) Remove the Duplex Reverse Sensor Unit [1].
• 1 Connector [2]
• 1 Wire Saddles [3]
• 1 Harness Guide [4]
• 1 Screw [5]
[1]
x2
[5]
4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit
[2]
[3]
[4]
F-4-132
2) Remove the Harness [1] from the 2 Harness Guide [4].
• 3 Connectors [2]
• 1 Cable Clip [3]
x3
[4]
x3
[1]
3) Remove the Harness [1] from the Harness Guide [2].
• 4 Connectors [3]
x4
[2]
[1]
4-53
[3]
[2]
F-4-133
[3]
[1]
[2]
[2]
F-4-134
4-53