Reader Controller Cover; Removing The Reader Controller Cover; Left Pickup Drive Assembly; Removing The Left Pickup Drive Assembly - Canon iR7086 Series Service Manual

[1]

10.5.1.10 Reader Controller Cover

10.5.1.10.1 Removing the Reader Controller Cover

iR7105 / iR7095 / iR7086 / iR7095P
1) Remove the original size sensor unit (rear).
2) Remove the 2 screws [1], and detach the flexible cable [2] together
with the cover sheet [3].
3) Disconnect the flexible cable [2] from the connector [4].
[2] [3]
4) Remove the 6 screws [1], and detach the reader controller cover [2].
[1] [2]
[1]
[1]

10.5.2 Left Pickup Drive Assembly

10.5.2.1 Removing the Left Pickup Drive Assembly

iR7105 / iR7095 / iR7086
Construction
[2]
F-10-19
0017-9845
[1]
[4]
F-10-20
[1]
[1]
F-10-21
1) Remove the rear cover.
2) Open the main controller box assembly.
3) Remove the high-voltage PCB unit.
4) While detaching the belt [1], remove the three screws [2], and detach
the left pickup drive assembly [3].
[1]

10.5.3 Pickup Drive Assembly

10.5.3.1 Removing the Pickup Drive Assembly

iR7105 / iR7095 / iR7086
Construction
1) Remove the rear cover.
2) Remove the high-voltage PCB unit.
3) Remove the flywheel.
0010-9572
4) Remove the drum gear.
5) Remove the waste toner pipe.
6) Remove the two screws [1], and loosen the harness guide [2]; discon-
nect the two connectors [3], and remove the six screws [4]; then, detach
the pickup drive assembly [5].
F-10-22
[3] [2]
[2] [2]
F-10-23
F-10-24
Chapter 10
0010-9576
10-13