Mitsubishi Electric MELSERVO-J4 Instruction Manual page 138

7. OBJECT DICTIONARY
(15) User parameter configuration (2D34h)
Index Sub
2D34h 0
Default
1
The parameters whose symbols are preceded by * are not automatically enabled. Writing "1EA5" to this
object enables the parameters. This operation can be performed only in the Pre-Operational state.
The read values of this object are as follows. The completion of the parameter enables processing can
be checked.
Value
0
1 Parameter enabling processing is not being executed. (The processing is completed.)
Name
User parameter configuration
Range
Refer to the text.
Description
Parameter enabling processing is being executed.
7 - 37
Data Type Access
UNSIGNED16 rw
Units EEP-ROM
Impossible
PDO Mapping
Impossible
Parameter