Show Spanning-Tree Interface - Juniper EX9200 Features Manual

show spanning-tree interface

List of Syntax
Syntax
Syntax (EX Series
Switches and the QFX
Series)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
Copyright © 2017, Juniper Networks, Inc.
Syntax on page 149
Syntax (EX Series Switches and the QFX Series) on page 149
show spanning-tree interface
<brief | detail>
<msti msti-id>
<routing-instance routing-instance-name>
<vlan-id vlan-id>
show spanning-tree interface
<brief | detail>
<msti msti-id>
<vlan-id vlan-id>
Command introduced in Junos OS Release 8.4.
Command introduced in Junos OS Release 9.0 for EX Series switches.
Command introduced in Junos OS Release 11.1 for the QFX Series.
Display the configured or calculated interface-level STP parameters.
none—Display brief STP interface information.
brief | detail—(Optional) Display the specified level of output.
msti msti-id—(Optional) Display STP interface information for the specified MST instance.
routing-instance routing-instance-name—(Optional) Display STP interface information
for the specified routing instance.
vlan-id vlan-id—(Optional) Display STP interface information for the specified VLAN.
view
show spanning-tree interface on page 150
show spanning-tree interface (QFX Series) on page 151
show spanning-tree interface detail on page 151
show spanning-tree interface msti on page 153
show spanning-tree interface vlan-id on page 153
show spanning-tree interface (VSTP) on page 154
show spanning-tree interface vlan-id (VSTP) on page 154
Table 8 on page 68 lists the output fields for the
Output fields are listed in the approximate order in which they appear.
Chapter 6: MSTP Monitoring Commands
show spanning-tree interface
command.
149