Juniper EX9200 Features Manual page 181

Table 18: Spanning-Tree Protocol Configuration Parameters (continued)
Field Function
Max Hops (MSTP only) Specifies the number of hops in a region
before the BPDU is discarded.
Configuration Name (MSTP only) Specifies the MSTP region name carried
in the MSTP BPDUs.
Revision Level (MSTP only) Specifies the revision number of the
MSTP configuration.
Force STP Version Enables or disables STP.
NOTE: This option
is supported only on
EX4300 switches.
Ports
Interface Name Specifies an interface for the spanning-tree protocol.
Cost Specifies the link cost to determine which bridge is
the designated bridge and which interface is the
designated interface.
Priority Specifies the interface priority to determine which
interface is elected as the root port.
Disable Port Disables the spanning-tree protocol on the interface.
NOTE: This option
is not supported on
EX4300 switches.
Edge Configures the interface as an edge interface. Edge
interfaces immediately transition to a forwarding
state.
Copyright © 2017, Juniper Networks, Inc.
Chapter 7: Using VSTP
Your Action
Type a value.
Type a name.
Type a value.
To enable this option, select the check box.
1. Click the tab.
Ports
2. Choose one of the following options:
Click and select an interface from the
Add
list. For an EX8200 Virtual Chassis
configuration, select the member, FPC,
and the interface from the list.
Select an interface in the
and click Edit .
To delete an interface from the
configuration, select it in the
table and click .
Remove
Type a value.
Select a value from the list.
To enable the option, select the check box.
To enable the option, select the check box.
Port/State table
Port/State
165