Vlan-Group - Juniper EX9200 Features Manual

vlan-group

Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
vlan-group group group-name {
vlan (vlan-id |vlan-group |all) {
}
[edit protocols vstp]
Statement introduced in Junos OS Release 15.1 for EX Series switches.
Configure VLAN group for Spanning Tree Protocol (VSTP). VSTP is used to prevent loops
in Layer 2 networks on a per-VLAN basis.
BEST PRACTICE:
is minimal and this configuration ensures that a spanning-tree protocol is
running on all VLANs on your switch, even when your switch is supporting
more than the maximum number of allowed VSTP VLANs.
The remaining statements are explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
vstp on page 194
show spanning-tree bridge
show spanning-tree interface
Configuring VLAN Spanning Tree Protocol on page 168
Understanding VSTP for EX Series Switches and QFX Series Switches on page 159
Chapter 8: Configuration Statements for VSTP
Configure RSTP when you configure VSTP. RSTP overhead
.
CLI Explorer
193