Msti - Juniper EX9200 Features Manual

Spanning-Tree Protocols Feature Guide for EX9200 Switches

msti

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
126
Understanding VSTP for EX Series Switches and QFX Series Switches on page 159
msti msti-id {
bridge-priority priority;
vlan (vlan-id | vlan-range|open-set-of-values);
interface (interface-name | all) {
cost cost;
edge;
priority interface-priority;
}
}
[edit protocols mstp],
[edit routing-instances routing-instance-name protocols mstp]
Statement introduced in Junos OS Release 13.2X50-D10 for EX Series switches.
Statement updated in Junos OS Release 15.1 for EX Series switches to support
configuration of spanning tree parameters globally on all interfaces.
NOTE: You cannot disable spanning tree parameters globally on all interfaces.
Configure the multiple spanning-tree instance (MSTI) identifier.
msti-id —MSTI instance identifier.
Range: 1 through 4094
The remaining statements are explained separately. See
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring MST Instances on a Physical Interface
Configuring MSTP on page 108
Example: Configuring Network Regions for VLANs with MSTP on page 81
Understanding MSTP for EX Series and QFX Series Switches on page 78
CLI Explorer .
Copyright © 2017, Juniper Networks, Inc.