Configuring The Maximum Number Of Equal-Cost Routes For Load-Balancing; Configuring A Large Scale Ipv6 Mbgp Network; Prerequisites; Configuring An Ipv6 Mbgp Peer Group - HP A6600 Configuration Manual

Table 15 Description of the both, send, and receive parameters and the negotiation result
Local parameter
send
receive
both
Configuring the maximum number of equal-cost routes for
load-balancing
To do...
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 MBGP address
family view.
4. Configure the maximum
number of equal-cost routes
for load balancing.

Configuring a large scale IPv6 MBGP network

Prerequisites

Before you configure the following tasks, you need to configure IPv6 MBGP basic functions.

Configuring an IPv6 MBGP peer group

For easy management and configuration, you can organize some IPv6 MBGP peers that have the same
route update policy into a peer group. A policy configured for a peer group applies to all the members in
the group.
To do...
1. Enter system view.
2. Enter BGP view.
3. Enter IPv6 address family
view.
4. Create an IPv6 BGP peer
group.
Peer parameter
receive
both
send
both
both
Use the command...
system-view
bgp as-number
ipv6-family multicast
balance number
Use the command...
system-view
bgp as-number
ipv6-family
group ipv6-group-name [ external
| internal ]
379
Negotiation result
The ORF sending capability is enabled locally and
the ORF receiving capability is enabled on the
peer.
The ORF receiving capability is enabled locally
and the ORF sending capability is enabled on the
peer.
Both the ORF sending and receiving capabilities
are enabled locally and on the peer, respectively.
Remarks
—
—
—
Required.
By default, load balancing is
disabled.
Remarks
—
—
—
Required.