HP A6600 Configuration Manual page 361

[RouterB] interface pos 5/0/1
[RouterB-Pos5/0/1] multicast ipv6 boundary scope 4
[RouterB-Pos5/0/1] quit
[RouterB] interface pos 5/0/2
[RouterB-Pos5/0/2] multicast ipv6 boundary scope 4
[RouterB-Pos5/0/2] quit
# On Router C, configure POS 5/0/1 and POS 5/0/2 as the boundary of IPv6 admin-scope zone 2.
<RouterC> system-view
[RouterC] interface pos 5/0/1
[RouterC-Pos5/0/1] multicast ipv6 boundary scope 4
[RouterC-Pos5/0/1] quit
[RouterC] interface pos 5/0/2
[RouterC-Pos5/0/2] multicast ipv6 boundary scope 4
[RouterC-Pos5/0/2] quit
# On Router D, configure POS 5/0/1 as the boundary of admin-scope zone 2.
<RouterD> system-view
[RouterD] interface pos 5/0/1
[RouterD-Pos5/0/1] multicast ipv6 boundary scope 4
[RouterD-Pos5/0/1] quit
Configure C-BSRs and C-RPs
4.
# On Router B, configure the service scope of RP advertisements and configure Serial 2/0/1 as a C-BSR
and C-RP of admin-scope zone 1.
[RouterB] pim ipv6
[RouterB-pim6] c-bsr scope 4
[RouterB-pim6] c-bsr 1002::2
[RouterB-pim6] c-rp 1002::2 scope 4
[RouterB-pim6] quit
# On Router D, configure the service scope of RP advertisements and configure Serial 2/0/1 as a C-BSR
and C-RP of admin-scope zone 2.
[RouterD] pim ipv6
[RouterD-pim6] c-bsr scope 4
[RouterD-pim6] c-bsr 3002::2
[RouterD-pim6] c-rp 3002::2 scope 4
[RouterD-pim6] quit
# On Router F, configure Serial 2/0/1 as a C-BSR and C-RP in the global scope zone.
<RouterF> system-view
[RouterF] pim ipv6
[RouterF-pim6] c-bsr scope global
[RouterF-pim6] c-bsr 8001::1
[RouterF-pim6] c-rp 8001::1
[RouterF-pim6] quit
Verify the configuration
5.
To view the BSR election information and the C-RP information on a router, use the display pim ipv6
bsr-info command. For example:
# View the BSR information and the locally configured C-RP information on Router B.
350