HP A6600 Configuration Manual page 221

[RouterA-pim] c-rp loopback 0
[RouterA-pim] quit
# Configure the C-BSR and C-RP on Router B.
[RouterB] interface loopback 0
[RouterB-LoopBack0] ip address 2.2.2.2 32
[RouterB-LoopBack0] pim sm
[RouterB-LoopBack0] quit
[RouterB] pim
[RouterB-pim] c-bsr loopback 0
[RouterB-pim] c-rp loopback 0
[RouterB-pim] quit
Configure BGP, specify the MBGP peer and enable direct route redistribution.
5.
# On Router A, configure the MBGP peer and enable direct route redistribution.
[RouterA] bgp 100
[RouterA-bgp] router-id 1.1.1.1
[RouterA-bgp] peer 192.168.1.2 as-number 200
[RouterA-bgp] import-route direct
[RouterA-bgp] ipv4-family multicast
[RouterA-bgp-af-mul] peer 192.168.1.2 enable
[RouterA-bgp-af-mul] import-route direct
[RouterA-bgp-af-mul] quit
[RouterA-bgp] quit
# On Router B, configure the MBGP peer and enable route redistribution from OSPF.
[RouterB] bgp 200
[RouterB-bgp] router-id 2.2.2.2
[RouterB-bgp] peer 192.168.1.1 as-number 100
[RouterB-bgp] import-route ospf 1
[RouterB-bgp] ipv4-family multicast
[RouterB-bgp-af-mul] peer 192.168.1.1 enable
[RouterB-bgp-af-mul] import-route ospf 1
[RouterB-bgp-af-mul] quit
[RouterB-bgp] quit
Configure MSDP peer
6.
# Specify the MSDP peer on Router A.
[RouterA] msdp
[RouterA-msdp] peer 192.168.1.2 connect-interface pos 5/0/0
[RouterA-msdp] quit
# Specify the MSDP peer on Router B.
[RouterB] msdp
[RouterB-msdp] peer 192.168.1.1 connect-interface pos 5/0/0
[RouterB-msdp] quit
Verify the configuration
7.
You can use display bgp multicast peer to display MBGP peers on each router. For example,
# Display MBGP peers on Router B.
[RouterB] display bgp multicast peer
210