Assembly - Yamaha RX10H Service Manual

SECONDARY SHEAVE
5. Measure:
S Ramp shoe thickness a
Out of specification ! Replace the ramp
shoe.
Wear limit:
1.0 mm (0.04 in)

ASSEMBLY

1. Install:
S Stopper
S Sliding sheave
Screw (stopper):
7 Nm (0.7 mSkg, 5.1 ftSlb)
2. Install:
S Fixed sheave 1
S Bolts 2
(along with the shims)
Bolt:
10 Nm (1.0 mSkg, 7.2 ftSlb)
3. Install:
S Secondary sheave spring 1
S Spring seat 2
NOTE:
Hook the end of the secondary sheave spring
into the spring holes in the fixed sheave. Hook
the other end of the spring into the holes in the
spring seat.
Standard spring position:
3-3 (RX10, RX10S, RX10R, RX10RS)
1-6 (RX10M, RX10MS)
4-13
POWR
TR