Yamaha RX10H Service Manual page 659

Parts to be tightened
Crankcase (M9 × 1.5) (1st)
(2nd)
Crankcase (M6 × 1.0)
Countershaft cover
A.C. magneto rotor cover
Starter clutch
Stator coil
Starter motor
Pickup coil
Pickup coil plate
Fuel pump
Oil pressure switch
Cylinder identification sensor
Ignition coil
NOTE:
1. First, tighten the bolt to approximately 15 Nm (1.5 m•kg, 11 ft•lb) with a torque wrench, then
loosen the bolt completely.
2. Retighten the bolt to 15 Nm (1.5 m•kg, 11 ft•lb), and tighten another 65 ~ 70° with a angle gauge.
TIGHTENING TORQUE
Tightening torque
Nm m•kg
15 1.5
15 + 65 ~ 70° 1.5 + 65 ~ 70° 11 + 65 ~ 70°
12 1.2
12 1.2
12 1.2
12 1.2
10 1.0
27 2.7
6 0.6
10 1.0
7 0.7
15 1.5
8 0.8
10 1.0
130
SPEC
Remarks
ft•lb
11 See NOTE.
8.7
8.7
8.7
8.7
7.2 Apply LOCTITE
20
4.3
7.2
5.1
11
5.8
7.2
®