Yamaha RX10H Service Manual page 675

SPEC
CABLE ROUTING
Fit it to the rear suspension
lead. (Other types are attached
with plugs.) (RX10GTL)
Clamp the wire harness and radi-
ator fan motor lead. (RX10RTL,
RX10RL, RX10RTRL, RXW10L,
RX10ML)
Clamp the wire harness, radiator
fan motor lead and electronic
rear suspension lead.
(RX10GTL)
Tighten the frame cross mem-
ber and frame together.
Pass the electronic rear sus-
pension sub-lead between the
guide plate for the reverase
lever and the frame.
Point the clamp position to the
downward.
Point the clamp position to the
inside.
Clamp the leads before the fix-
ture.
146