Inspection - Yamaha RX10H Service Manual

SECONDARYSHAFT

INSPECTION

1. Inspect:
S Secondaryshaft 1
Scratches (excessive)/damage ! Replace.
S Splines 2
Wear/damage ! Replace the secondary-
shaft.
S Bearing contact surface 3
Scratches/wear/damage ! Replace the
secondaryshaft.
2. Inspect:
S Bearing 1
Pitting/damage ! Replace.
3. Measure:
S Brake disc thickness a
Out of specification ! Replace.
Minimum thickness:
4.5 mm (0.18 in)
Measuring point: 1 X 3 mm (0.04 X 0.12 in)
from the edge of the brake disc.
4-26
POWR
TR