SPEC
CABLE ROUTING
Coolant recovery tank
Coolant reservoir tank
10 ~ 30 mm (0.4 ~ 1.2 in)
20 ~ 40 mm (0.8 ~ 1.6 in)
Clamp the fuel pipe and sub-
wire lead.
Pass the fuel tank breather
hose between the relay harness
and the speed sensor harness.
Two harness untis should not
contact the pipe end.
Clamp the fuel tank breather
hose and two wire harness.
Tighten the frame cross mem-
ber and frame.
Clamp the fuel pipe, sub-wire
lead, speed sensor lead and
relay harness.
Wire harness clamp
Speed sensor
Nylon nuts
Point the pawl of clip to the
downward.
148