Subaru 1600 Service Manual page 742

7. Cruise Control
(Option)
1) General
The cruise control automatically con-
trols car speed and allows the car to
run at a constant speed without de-
pressing the accelerator pedal. In oper-
ation, when the driver sets a desired
speed with the cruise control switch,
the built-in micro-computer compares
the speed set in the memory with the
actual running speed detected by feed-
back signals from the speedometer.
This feedback system operates the
throttle of carburetor to correct the
speed difference, thereby keeping the
car at a constant speed.
Main switch
Fig. 15-258
ELECTRICAL SYSTEM
NOTE:
a. The cruise control must never be
used in the following driving con-
ditions.
(1)
When going up or coming
down a steep slope
(2) On roads with poor traction,
for example, snow-covered, icy,
or gravel roads
(3) When a strong wind is blowing
(4) In congested traffic
(5) On a road with many curves
b. Modification of this device must
never be attempted.
c. The main switch of the cruise con-
trol must always be turned off, ex-
cept when in use.
. Actuator ASSY
Clip
I
I'-"--J
!.iPP/e
15-79
To actuator
To accelerator
pedal
To carburetor
Link ASSY for
Hitachi carburetor
To carburetor
A25-819