Subaru 1600 Service Manual page 740

• Removal
1) Timer
a. Remove trim panel under instru·
ment panel on driver's side.
b. Disconnect electric connector from
timer.
c. Remove a screw, and take out
timer.
2) Chime
a. Remove screws, and take out glove
box.
b. Disconnect electric connector for
chime.
c. Remove a screw, and take out
chime.
• Installation
1) Timer
a. Install timer by tightening a screw.
b. Connect electric connector to
timer.
Fig. 15·252
ELECTRICAL SYSTEM
Fig. 15·250
1 Screw
2 Connector
3 Timer
A25·618
c. Install trim panel under instrument
panel on driver's side.
2) Chime
a. Install chime by tightening a screw.
b. Connect electric connector for
chime.
2
15-77
-------
A25-619
Fig. 15·251
c. Install glove box by tightening
screws.
6. Power Window
(Option)
Electric motors are provided for
window glass regulator of each door
and rear quarter (Hardtop) to open
and close the window.
1 Motor (Front, RH)
2 Sub switch (RH)
3 Motor (Rear, RH)
4 Control unit
5 Motor (Front, LH)
6 Main switch
7 Relay CP (Relay
&;
Breaker)
8 Auto switch (Front, LH)
9 Motor (Rear, LH)
10 Sub switch (LH)
A25-631
--,