Subaru 1600 Service Manual page 658

BODY
2. Console Box and Parking (Hand) Brake Cover
I Console box assembly
2
Tapping screw
1D
3 Washer
r//
4 Spring nut
i
5 Console bracket
6 Tapping screw
7
Flange screw
)1l
8 Hand brake cover
9 Hand brake cover tray
10 Hand brake cover bracket
11 Tapping screw
@
A24-707
Fig. 14·191
1) Remove the tray of hand brake
cover by disengaging the hook at the
rear of the tray with finger inserted
through the opening for hand brake
lever on the hand brake cover.
3. Inner Rear View
Mirror
2) Remove two tapping screws fixing
both console box and hand brake
cover to the floor.
3) Replace console box by removing
4 tapping screws and the following
items.
a. Connect electric connector for
radio.
b. Be careful not to catch electric
wiring with console box.
c. For automatic transmission ve-
hicles, also remove and install indi-
cator cover.
4) Replace parking (hand) brake
cover by removing tapping screw in
pocket.
NOTE:
Make proper alignment of hand brake
cover with hand brake lever when
installing.
~~
CD~
1
2
Fig. 14-192
Inner rear
view mirror
Plastic screw
A"24-766
Replacement of inner rear view mirror
can be carried out by removing plastic
screw.
Torque
0.7 - 1.0 ft-Ib)
1.0 - 1.4 N'm
J
(0.10 - 0.14 kg-m,
L -_ _ _ ---lL--_ _
14-63
NOTE:
a. Pay attention not to damage the
crisscross groove of the screw head
and thread portion.
b. Use genuine plastic screw only for
inner rear view mirror.
4. Luggage Shelf
A24·767
Fig. 14-193
,
•
1 Front luggage shelf
2 Cushion
3
Tapping screw
4 Flange nut
5 Bracket
Replacement of front luggage shelf can
be carried out by removing clips and
screws.
Fig. 14-194
Rear luggage shelf
Clip
A24-768
1) Remove rear seat cushion and
back rest.
2) Remove caps and shoulder belt
anchors on both sides. (for Hardtop
only)
3) Remove assist rail on rear pillar.
(for Hardtop only)
4) Remove rear pillar trim panel.
5) Remove speakers if provided.
6) Replace rear luggage shelf by
detaching eight clips.
A24-578
Fig. 14-195