Disassembling The Universal Joint; Disassembling The Differential Gear - Yamaha Rhino 450 YXR45FAV Service Manual

FRONT CONSTANT VELOCITY JOINTS, DIFFERENTIAL
GEAR AND FRONT DRIVE SHAFT

DISASSEMBLING THE UNIVERSAL JOINT

1. Remove:
M
a. Remove the circlips 1.
b. Place the universal joint in a press.
c. With a suitable diameter pipe 2 beneath
NOTE:
It may be necessary to lightly tap the yoke with
a punch.
d. Repeat the steps for the opposite bearing.
e. Remove the yoke.
L
2. Remove:
DISASSEMBLING THE DIFFERENTIAL
GEAR
1. Remove:
The differential gear unit is assembled into
a proper unit at the factory by means of
specialized equipment. Do not attempt to
disassemble this unit. Disassembly will
result in the malfunction of the unit.
7 - 9
• universal joint
MMM M MMM M M MMM M M MMM M
the yoke 3, press the bearing 4 into the
pipe as shown.
LLL L LLL L L LLL L L LLL L
• universal joint yoke
Use a universal joint holder 1.
Universal joint holder
P/N. YM-04062, 90890-04062
• differential gear unit 1
CAUTION:
DRIV
M MMM M M MMM M MMM
L LLL L L LLL L LLL