Yamaha Rhino 450 YXR45FAV Service Manual page 275

REAR CONSTANT VELOCITY JOINTS, FINAL DRIVE
GEAR AND REAR DRIVE SHAFT
2. Install:
• ring gear bearing housing
• ring gear bearing housing bolts (M8) 1
• ring gear bearing housing bolts (M10) 2
NOTE:
Apply sealant to the bolts 1 and 2 threads.
3. Install:
• bearing retainer
M MMM
a. Place a folded rag 1.
b. Secure the final drive pinion gear bearing
NOTE:
Apply locking agent (LOCTITE
of bearing retainer.
c. Attach the bearing retainer wrench 2.
d. Tighten the bearing retainer.
CAUTION:
The bearing retainer has left-hand threads.
Turn the retainer counterclockwise to
tighten it.
L LLL
7 - 34
23 Nm (2.3 m · kg, 17 ft · lb)
40 Nm (4.0 m · kg, 29 ft · lb)
Yamaha bond No. 1215
(Three Bond No. 1215
P/N. 90890-85505
M MMM M M MMM M M MMM M
housing edge in a vise.
Bearing retainer wrench
P/N. YM-04128, 90890-04128
Bearing retainer
170 Nm (17.0 m · kg, 125 ft · lb)
®
LOCTITE
L LLL L L LLL L L LLL L
DRIV
®
)
M MMM M M MMM M MMM
®
) to the threads
L LLL L L LLL L LLL