Table of Contents
Advertisement
CHANGING THE HEADLIGHT BULBS/
CHANGING THE TAIL/BRAKE LIGHT BULBS
5. Install:
• headlight bulb holder assembly
CAUTION:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
6. Connect:
• headlight bulb holder coupler
7. Install:
• headlight bulb holder cover
8. Close the hood.
CHANGING THE TAIL/BRAKE LIGHT
BULBS
1. Remove:
• cargo bed panel 1
2. Remove:
• tail/brake light bulb holder (with bulb) 1
• bulb
NOTE:
Turn the bulb holder counterclockwise and
remove the defective bulb.
WARNING
Keep flammable products and your hands
away from the bulb while it is on, since it
will be hot. Do not touch the bulb until it
cools down.
3 - 54
CHK
ADJ
New
Advertisement
Table of Contents
Troubleshooting
