Yamaha Rhino 450 YXR45FAV Service Manual page 131

CHANGING THE TAIL/BRAKE LIGHT BULBS
3. Install:
• bulb
New
Secure the new bulb in the tail/brake light
bulb holder.
CAUTION:
Avoid touching the glass part of the bulb.
Keep it free from oil; otherwise, the trans-
parency of the glass, life of the bulb, and
luminous flux will be adversely affected. If
oil gets on the bulb, thoroughly clean it
with a cloth moistened with alcohol or lac-
quer thinner.
4. Install:
• tail/brake light bulb holder (with bulb)
5. Install:
• cargo bed panel
Refer to "SEATS, ENCLOSURE, HOOD
AND CARGO BED" in chapter 8.
3 - 55
CHK
ADJ
· ·
7 Nm (0.7 m kg, 5.1 ft lb)