Table of Contents
Advertisement
*
4. Voltage
• Connect the pocket tester (DC 20 V) to the
indicator light assembly 1 coupler.
Tester (+) lead → Brown terminal 1
Tester (–) lead →
White/Yellow terminal 2
• Turn the main switch to "ON".
• Set the On-Command four-wheel drive
switch to "4WD".
• Check the voltage (12 V).
Refer to "2WD/4WD SELECTING SYSTEM".
SIGNALING SYSTEM
MEETS
SPECIFICATION
9 - 46
W/Y
B/G
W/L
OUT OF SPECIFICATION
The wiring circuit from the main switch to the
four-wheel drive switch is faulty, repair it.
–
+
ELEC
1
2
Br
Br W/Y
Br
Br B/G
Br
Br W/L
Advertisement
Table of Contents
Troubleshooting
