Adjusting The Throttle Cable - Yamaha Rhino 450 YXR45FAV Service Manual

ADJUSTING THE THROTTLE CABLE

1
a
2
1
ADJUSTING THE THROTTLE CABLE
NOTE:
_
Throttle cable free play should be adjusted
properly before adjusting the engine idling
speed.
1. Remove:
• driver seat
• passenger seat
• console
Refer to "SEATS, ENCLOSURE, HOOD
AND CARGO BED" in chapter 8.
2. Remove:
• throttle valve cover 1
3. Check:
• throttle cable a
Slack → Remove the slack.
4. Adjust:
• throttle cable
M MMM M MMM M
a. Loosen the locknut 1.
b. Turn the adjuster 2 in or out until there is
no slack.
Turning in
Turning out
c. Tighten the locknut.
NOTE:
_
After adjusting the throttle cable, depress the
accelerator pedal a few times and make sure
that the throttle valve 3 closes completely
after releasing the accelerator pedal.
3
L LLL L LLL L
5. Install:
• throttle valve cover
6. Install:
• console
• passenger seat
• driver seat
Refer to "SEATS, ENCLOSURE, HOOD
AND CARGO BED" in chapter 8.
3 - 7
CHK
ADJ
M MMM M M MMM M M MMM M M MMM
Slack increases.
Slack decreases.
L LLL L L LLL L L LLL L L LLL
M MMM
L LLL