Installing The Clutch - Yamaha Rhino 450 YXR45FAV Service Manual

CLUTCH
b. When turning the clutch housing clockwise
È, the clutch carrier assembly should turn
freely.
If not, the one-way clutch assembly is
faulty.
Replace it.
c. When turning the clutch housing counter-
clockwise É, the clutch housing and clutch
carrier assembly should be engaged.
If not, the one-way clutch assembly is
faulty.
Replace it.
L LLL L LLL L L LLL L
2. Check:
• clutch shoe
Heat damage → Replace.
3. Measure:
• clutch shoe thickness
Out of specification → Replace.
Clutch shoe thickness
1.5 mm (0.06 in)
Clutch shoe wear limit a
1.0 mm (0.04 in)

INSTALLING THE CLUTCH

1. Install:
• clutch carrier assembly
• clutch carrier assembly nut 1
NOTE:
Use a clutch holding tool 2 to hold the clutch
carrier assembly.
Universal clutch holder
P/N. YM-91042, 90890-04086
2. Lock the threads with a drift punch.
4 - 53
ENG
L LLL L L LLL L L LLL L
New
140 Nm (14.0 m · kg, 100 ft · lb)
LLL