Yamaha Rhino 450 YXR45FAV Service Manual page 216

MIDDLE GEAR
2. Install:
• bearing retainer
M MMM M MMM M M MMM M
a. Attach the folded rag 1.
b. Secure the bearing housing edge in the
vise.
c. Attach the bearing retainer wrench 2.
Middle gear bearing retainer
P/N. YM-04128
Bearing retainer wrench
P/N. 90890-04128
d. Tighten the bearing retainer.
CAUTION:
The middle driven pinion gear bearing
retainer has left-handed threads. To tighten
the retainer, turn it counterclockwise.
Bearing retainer
110 Nm (11.0 m · kg, 80 ft · lb)
L LLL L LLL L L LLL L
3. Install:
• shims 1
• bearing housing
NOTE:
Install the shims so that the tabs are positioned
as shown in the illustration.
4. Install:
• universal joint yoke
• washer
• middle driven pinion gear nut 1
NOTE:
Use the universal joint holder 2 to hold the
yoke.
Universal joint holder
P/N. YM-04062, 90890-04062
4 - 85
ENG
LT
M MMM M M MMM M M MMM M MMM
L LLL L L LLL L L LLL L LLL
LT
97 Nm (9.7 m · kg, 70 ft · lb)