Yamaha Rhino 450 YXR45FAV Service Manual page 98

CHANGING THE COOLANT
1
3 - 22
13.Install:
• coolant drain bolt (water pump)
(along with the copper washer)
10 Nm (1.0 m
• coolant drain bolt (cylinder)
(along with the copper washer)
10 Nm (1.0 m
14.Connect:
• water pump inlet hose
• coolant outlet hose
15.Remove:
• air bleed bolt 1
16.Fill:
• cooling system
(with the specified amount of the recom-
mended coolant)
Recommended antifreeze
High-quality
antifreeze containing corrosion
inhibitors for aluminum engines
Mixing ratio
1 : 1 (antifreeze : water)
Quantity
Radiator capacity (including all
routes)
2.7 L (2.38 Imp qt, 2.85 US qt)
Coolant reservoir capacity
0.35 L (0.31 Imp qt, 0.37 US qt)
NOTE:
The specified amount of coolant is a standard
amount. Fill the cooling system with coolant
until coolant comes out of the hole for the air
bleed bolt.
CHK
ADJ
· ·
kg, 7.2 ft lb)
· ·
kg, 7.2 ft lb)
ethylene glycol