I/O Port Settings - Furuno GP-3500F Installation Manual

3.3 I/O Port Settings

NMEA1 and NMEA2 ports
NMEA 1 and NMEA 2 ports are used to connect external navigation equipment such as an
autopilot and radar. Set up the ports according to equipment connected.
1. Press the [MENU] key to open the menu.
2. Press the [0] and [5] keys to show the I/O SETUP menu.
0-5. I/O PORT SETUP
NMEA I/O PORT 1
NMEA FORMAT
TLL OUTPUT
L/L FORMAT
OUTPUT DESTINATION
SELECT OUTPUT SENTENCE
NMEA I/O PORT 2
NMEA FORMAT
TLL OUTPUT
L/L FORMAT
OUTPUT DESTINATION
SELECT OUTPUT SENTENCE
RS232C FORMAT
BAUD RATE
CHARACTER LENGTH
STOP BIT
PARITY
NMEA FORMAT
L/L FORMAT
OUTPUT DESTINATION
SELECT OUTPUT SENTENCE
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
3. Rotate the knob to choose NMEA FORMAT of the NMEA1 I/O PORT 1 or NMEA1 I/O
PORT 2 and then roll the trackball rightward or leftward to choose NMEA format of the
equipment connected to that port.
1. NMEA0183 Ver 1.5 2. Ver 2.0
1. ON 2. OFF
1.DD MM.MM' 2.DD MM.MMM'
3.DD MM.MMMM'
1. ON 2. OFF
1. ON 2. OFF
1. NMEA0183 Ver 1.5 2. Ver 2.0
1. ON 2. OFF
1.DD MM.MM' 2.DD MM.MMM'
3.DD MM.MMMM'
1. ON 2. OFF
1. ON 2. OFF
1. 4800 2. 9600 3. 19200 4. 38400
1. 7BITS 2. 8BITS
1. 1BIT 2. 2BITS
1. EVEN 2. ODD 3. OFF
1. NMEA0183 Ver 1.5 2. Ver 2.0
1.DD MM.MM' 2.DD MM.MMM'
3.DD MM.MMMM'
1. ON 2. OFF
1. ON 2. OFF
I/O PORT SETUP menu
33