Furuno GP-3500F Installation Manual page 36

Color gps/plotter/sounder

Hide thumbs Also See for GP-3500F:

Table of Contents

4. To offset speed data, rotate the knob to choose NMEA SPEED CALIB and then roll the

trackball rightward or leftward as appropriate to display appropriate offset value. For

example, if the actual speed is 10.0 kt and the displayed value is 11.0 kt, enter +10(%).

5. Rotate the knob to choose TEMPERATURE SOURCE and then roll the trackball

rightward or leftward to choose source of water temperature data.

NMEA:

INTERNAL E/S: Triducer or speed/water temperature sensor

6. To offset water temperature data, rotate the knob to choose NMEA TEMP CALIB and

then roll the trackball rightward or leftward as appropriate to display appropriate offset

value. For example, if the actual water temperature is 20° and the displayed value is 17°,

enter +3(°).

7. Rotate the knob to choose DEPTH source and roll the trackball rightward or leftward

then roll the trackball rightward or leftward as appropriate to choose source of depth

data.

NMEA:

INTERNAL E/S: Transducer or triducer

8. To offset depth data, rotate the knob to choose NMEA DEPTH CALIB and then roll the

trackball rightward or leftward as appropriate to display appropriate offset value.

9. Press the [MENU] key several times to close the menu.

MTW (water temperature) sentence (default setting).

DPT (Ver. 2.0), DBT (Ver. 1.5), DBK, DBS (default setting)

Table of Contents