Furuno GP-3500F Installation Manual page 37

Ship and antenna characteristics
1. Display page 1 of the DISPLAY SETUP and then rotate the knob to choose NEXT
PAGE.
0-1. DISPLAY SETUP
PREVIOUS PAGE
WAYPOINT STATUS
WAYPOINT INFO
MARK STATUS
OWN SHIP'S MARK
SHIP'S LENGTH
SHIP'S WIDTH
ANTENNA POSITION Va 05.0m
ANTENNA POSITION Hb 01.0m
COG HOLD (LOW SPD)
WPT NAME DISPLAY
SHIP'S DIRECTION
CURSOR SHAPE
CURSOR COLOR*
VIDEO PILOT
DISPLAY BRILLIANCE
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
2. Rotate the knob to choose OWN SHIP'S MARK and then roll the trackball rightward or
leftward to choose the size for the own ship mark. For "SHIP," the mark is scaled to
indicate the length and width of the vessel.
3. Rotate the knob to choose SHIP'S LENGTH and then roll the trackball rightward or
leftward to set ship's length.
4. Rotate the knob to choose SHIP'S WIDTH and then roll the trackball rightward or
leftward to set ship's width.
5. Rotate the knob to choose ANTENNA POSITION Va and then roll the trackball rightward
or leftward to set antenna position "a".
6. Rotate the knob to choose ANTENNA POSITION Hb and then roll the trackball rightward
or leftward to set antenna position "b".
7. Press the [MENU] key three times to close the menu.
1. ON 2. OFF
1. ON 2. OFF
1. ON 2. OFF
1. LARGE 2. SMALL
40.0m
05.0m
L
b
W
a
1. ON
1. WITHOUT ZERO
1. COG
1. +
1. 2. 3.
1. ON
1. HIGH
DISPLAY SETUP menu (2/2)
30
2/2
3. SHIP
(0.1-99.9m)
(0.1-99.9m)
(0.1-99.9m)
(0.1-99.9m)
2. OFF
2. ALL
2. HEADING
2. CROSSHAIR
4. 5. 6. 7.
2. OFF
2. LOW
*: For C-MAP,
C1 to C7 for
color icon.