Navigator Settings - Furuno GP-3500F Installation Manual

3.2 Navigator Settings

If you are receiving position data from an external navigator, set up as follows:
Navigator settings
1. Press the [MENU] key to display the menu.
2. Press the [0] and [2] keys to shown the NAVIGATOR SETUP menu.
0-2 NAVIGATOR SETUP
SELECT NAV SOURCE
LOCAL TIME (INT GPS)
LOCAL TIME (EXT NAV)
GEODETIC DATUM
POSITION SMOOTHING
SPEED SMOOTHING
SPEED AVERAGING (INT)
SPEED AVERAGING (EXT)
LATITUDE OFFSET
LONGITUDE OFFSET
DISABLE SATELLITE
DEFAULT LATITUDE
DEFAULT LONGITUDE
ANTENNA HEIGHT
GPS FIX MODE
DGPS/WAAS
DGPS/WAAS ALARM
DGPS BEACON STATION
SELECT FREQUENCY
DGPS BAUD RATE
WAAS SEARCH
CORRECTIONS DATA SET 02
OVERWRITE WAYPOINT
TURN KNOB TO SELECT MENU.
SELECT THE ITEM OF EACH MENU BY TRACKBALL.
3. The cursor is selecting SELECT NAV SOURCE; roll the trackball rightward or leftward to
choose position data source.
INT: Internal GPS navigator (default setting)
EXT: External GPS navigator
LORAN C: External Loran C navigator
ALL: Choose this option in case of multiple position-fixing equipment. The
equipment having highest accuracy has priority.
4. Press the [MENU] key several times to close the menu.
1
. INT 2. EXT
4. ALL
+00:00
+00:00
WGS-84
000
000
060
060
0.000'N
0.000'E
_ _ _ _ _ _
45 35.000'N
125 00.000'E
05m
1. 2D 2. 2D/3D
1
. DGPS 2. WAAS 3. AUTO 4. OFF
1. YES 2. NO
1. AUTO 2. MANUAL
283.5 kHz
1. 50 2. 100
1. AUTO 2. MAN 120
1. DIALOG
NAVIGATOR SETUP menu
31
3. LORAN-C
3. 200
2. NO DIALOG