Connection Of External Monitor - Furuno GP-3500F Installation Manual

3.7 Connection of External Monitor

Use the optional external monitor connection kit to connect a VGA monitor as a remote
display.
Name
Cable Assy. 15SDS/XHP10-005 000-144-511
Grommet MG-4
1. Do steps 1-4 in paragraph 3.6.
2. Open a hole in the OPTION grommet in order to pass the cable assy.
3. Referring to the illustration below for location, unfasten the four screws marked with the
triangles. On the MAIN Board (14P0379), disconnect the mini-pin coaxial connector
from J15 and the cable assy. from J7 and then remove the GPS receiver assy.
External Monitor Connection Kit
Type: OP03-176, Code No.: 008-526-360
Type Code No.
000-871-378
14P0383
14P0380
Display unit, rear view, rear cover removed
Qty
1 0.5 m, Mini D-sub 15P
1
GPS
Receiver
Assy.
J15
42
Remarks
J7