Mounting
Desktop, overhead mounting
1. Fix the hanger to the mounting location with four tapping screws (5X20). See the outline
drawing on page D-1 for mounting dimensions.
2. Loosely screw knob bolts into the display unit.
3. Set the display unit to the hanger and tighten the knob bolts.
75 0.5
Unit: mm
Display unit, mounting dimensions for desktop and overhead mounting
4. Insert a rubber cushion in each of the holes at the rear bottom corners (desktop
mounting) or rear top corners (overhead mounting). (This will protect the display unit
from damage if it hits the hanger.)
229 0.5
* Location for desktop mounting
Display unit, rear view
2
4- 7
Rubber
Cushion*